- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
 |
| Color: | |
|---|---|
| Size: | |
| Material: | |
| Quantity: | |
JBX01
KINNO
$2.3
1.General introduction:
Powder coatings are mixed with a certain proportion of the resin, fillers, curing agents and other additives, then prepared by hot extrusion ,crushed and sieved.The products are stable at room temperature storage, then baking heat melted and solidified to form a smooth and bright permanent coating to achieve the purpose of decoration and corrosion.
2.Feature:
1).The products are non-toxic, solvent-free and non-toxic volatile substances,
there are no intoxication, no fire, no "three wastes" emissions and other pollution problems, in full compliance with national environmental laws.
2).Raw material utilization is high, the highest utilization rate even more than
99%.
3).After being pre-coated handle, disposable construction, without primer,
you can get a sufficient thickness of the coating, easy to automate operation, high production efficiency, reduce costs.
4).Dense coating adhesion, good impact strength and toughness, high
coverage corners, with excellent resistance to chemical corrosion and electrical insulation properties.
5).Powder coatings storage and transport are safety and convenience.
3.Product series:
The products include high light ( above 86%),glazed (76%-85%),matte(20%-50%),low light (below 20%). We also offer a variety of shiny products according to the needs of users.
| Physical And Chemical Properties | |
| Sand grain coating film thickness | 60um~80um |
| Curing conditions | 160°C/20min; 180°C/15min; 200°C/12min |
| Acid value | 30-36mgkOH/g |
| Glass transition temperature | ≥65 |
| Viscosity (200 ° C,mpa.s) | 3800-4800mPa.s/200°C |
| Indentation hardness | ≥80 |
| Adhesion | Grade 0 |
| Impact resistance | no cracking |
| Cupping test | 6mm without cracking |
Bending resistance | 3mm without cracking |
Chemical stability | no bubbles, softening, falling off |
| Salt spray corrosion resistance | R≤9.5 |
Moisture and heat resistance | ≤ grade 1 |
Artificially accelerated weather resistance | level 0 |
| Boiling water resistance | no bubbles, water spots, wrinkle spinning, falling off, slightly color difference allowed |
| Preparation method | After mixing the prepared polyester resin with curing agent TGIC, pigments, fillers and auxiliary agents according to the formula ratio, melt extrusion, tablet pressing and crushing with a twin-screw extruder, and then pulverize the sheet material and sieve it to make it. powder coating. It is sprayed on the surface-treated metal plate with an electrostatic spray gun. |
| Foshan Faxus New Material Company Limited |
| Please be noticed that the information and testing results represent above is for reference only. Results and figures above will be changed based on different testing conditions. Customers are suggested to design and test the product formula based on the actual conditions of production properties. |
STORAGE CONDITION
Storage temperature ≤30ºC;
Storage condition is required to be dry and with good air circulation.
Avoiding sunlight exposure.
PACKAGE
The products are packed by polyethylene bag, 25kg/carton or 20kg/carton, 1ton/pallet.
.Why choose our products?
1). We have our own factory. The good quality and the competitive is the advantage of our company.
2). The material we choose is always good and products always come out with high quality.
3). A trial order or sample orders are welcomed.
4). Our products are exported to Europe, America, Southeast Asia, and other countries and regions in the world.
5). We will do our best to service you all the time if you have the further question.
FAQ
Is Faxus Chemical a trader or a production factory?
Answer: We are production factories operate a coating factory and a resin factory in Guangdong province of China. We accumulate rich experience on coating manufacturing and powder coating process.
How to ensure the color stability of powder coatings?
Answer: When customers need to customize new color orders, we will first spray two color palettes according to their requirements, one for customer confirmation and the other for factory reference. After the customer confirms the color, we will record the formula of the confirmed color palette as the basis for future production. Each batch of orders will be coated with a color palette to compare the color differences and ensure the stability of the paint color.
Is the sample of powder coating free of charge?
Answer: When customers need to customize new color orders, we will first make color customization according to their requirements. Due to the cost involved in the sample, we will charge a sample fee of USD4.5/per color, which includes one aluminum color board and one kilogram of powder coating of the corresponding color. If the customer confirms the color and places a bulk order in our factory, these sample fees will also be deducted from the payment or refunded to the customer.
My production line is new. Can you provide support for spray painting production technology?
Answer: Our company has a technical team of over 20 product engineers. If customers encounter spray testing problems when they are put into use on a new production line and need assistance, we can provide suggestions through remote video conferences, or customers can pay us to arrange personnel to go and debug.
What kind of information is required for customizing powder coatings?
Answer: Customer provide the specific requirements which include durability, gloss, color, surface effect, production application, etc.
Detailed Photos
